Product Description
Nano Mill CNC
NanoMill is designed to make gaskets and other fixtures for use with RKD Engineering, Nisene and NSC decapsulators. It can also perform mechanical decapsulation including heat spreader removal in preparation for acid decapsulation. It provides an easy to use solution for quick turn decapsulator tooling and device preparation. The NanoMill is controlled by a small touch pad user interface that allows for the operator to select the desired function and enter the key device measurements. There is no need to know anything about machining or G Code to operate NanoMill.
To make gaskets, all that is necessary is to select the type of gasket to be made and input the key measurements of the device to be decapsulated. Both simple definition gaskets as well as pocket gaskets (monolithic) that are used to positively locate a small package can be made. Additional gasket types can be made that allow easy decapsulation of PGA and BGA devices.
NanoMill comes complete with everything need to get started. The AFLAS gasket materials come precut to the correct diameter and with an adhesive backing. For use, the protective paper is peeled off of the back of the blank and it is placed on the holding fixture. The holding fixture is then inserted in the fixture clamp and the gasket is ready to machine. For a definition gasket the cavity dimensions are set into the software and the operation is run. To make a pocket gasket, the cavity size, the package size, die offset from the package center, and the desired pocket depth are entered. Gasket blanks are available in 1 and 1, 3/8 inch diameters and in 0.062 and 0.094 thickness.
- Eliminates gasket purchasing lead 3me
- Simple operator interface with full process programmability
- Makes any gasket required for acid decapsula3on
- Removes heat spreaders and heat slugs
- Easy and fast mechanical decapsula3on
- Available and inexpensive tooling
- Small footprint takes liAle bench space
Specifications- Machine size: 205 mm high, 330 mm wide, 230 mm deep
- Weight: 10 Kg
- Power requirements: 90 to 250 VAC 49 to 61 Hertz at 4 amps maximum
- X axis travel: 38 mm
- Y axis travel: 38 mm
- Z axis travel: 38 mm
- Maximum speed: 250 mm/minute
- Resolution: 6 microns
- Positional Accuracy: + 5 microns per millimeter of travel
- Spindle axis accuracy: + 1.0 mill radians normal to xture plane
- Z axis repeatability: + 10 microns
- Maximum spindle speed: 7,000 RPM
- Tool holder: tools mount directly into the spindle
- Tool shank diameter: 3.175 mm (0.125 inch)
- Tool preset height: 17.5 mm
